1. Choose the right cooling system:
According to the advice of experts, in normal temperature conditions, many people should choose a mild dehumidification mode to save electricity.
2. Leave the temperature control appropriate
In Japan, the most appropriate temperature is 27 to 28 degrees C. Many people just claim one degree of equivalent to the electricity of air conditioner will reduce by 10%. In Vietnam, the recommended temperature is 26 degrees C.
3. Set up automatic fan mode:
This way saves electricity when the machine’s operating capacity is smaller than other modes, and the whole room will be completely cool. Some users often let blowers blow hard into a certain area, which is both wasteful and unhealthy in the long run.
4. Clean the air filter regularly:
The cleaning time of the air filter unit is recommended 2 times a week to ensure the device operates stably as well as reducing the capacity burden. Filter nets are often designed to be removed quite easily, but care should be taken to use cold water to wash and not to dry them as they can deform because they cannot withstand high temperatures. When you’re washing water, it is also important to spray the right side so that the dirt falls from the left side of the sieve.
5. Use a heat-resistant silver plate to cover the outdoor unit
This allows the outdoor unit of the air conditioner to be exposed to direct sunlight. If conditions permit, the user can make better anti-heat wooden frames or other insulation materials. The cost of buying heat-resistant silver plates is quite cheap but can save money on air-conditioning by up to 10%.
Behind the magnificent constructions, magnificence is the hard work of relentless work of mechanical engineers. We, the contractor Tinh Ky always want to create not only quality construction, but also the value of “tinh thông – tinh gọn” that the company always aims to.
On December 24, Vinpearl Empire Condotel Nha Trang had a successful opening ceremony, bringing joy not only to the public but also to the builders of the building.
The project started in 10/2016, completion time: 12 months. Throughout the construction process, difficulties and challenges are unavoidable. But with the effort, creativity combined with experience, the team of Tinh Ky always ensure the progress and quality for the investor.
This is an event marking the development of Tinh Ky always develops more strongly and more sustainably.
Congrats all the team that made the success of this project
Japanese partners are always the leading in technology field about the quality, standard; Cooperating with Japanese companies in technical, commercial and cultural exchanges. is always the joy and pride for Tinh Ky.
On the occasion of the working trip in Ho Chi Minh City, on 7/12/2017, two companies Tinh Ky and Fujitsu had a meeting and talked about the new electromechanical software. and modern technology from the Japanese.
Vinpearl Empire Condotel Nha Trang is the project that engineers team has spent much effort from design to construction phase, to create a perfect and quality works in an optimal time.
The pride of the project is that the construction phase is in line with the 3D design, using BIM technology, thereby optimizing the cost and time, thoroughly resolving even the most complex problems. the layout of equipment on the roof of the building.
When the project is almost complete, look back on a hard working process to create a worthy achievement of the team.
Chiller room pictures:
Cooling tower pictures:
Project scale: 2 basements, 6 floors of trade center, 33 floors including: 1221 apartments & hotel. Total floor area: 151.000 square meters.
Tinh Ky is confident to apply BIM technology in design as well as construction, helping to speed up the project.
Completion time of this project: 12 months.
On September 28, 2017, VINPEARL EMPIRE CONDOTEL NHA TRANG, work by the Tinh Ky Co., Ltd as the main M&E contractor, was succeeded in power on. The event was earlier than expected. This is an event that marked the success of the M&E item in particular and the growth of the Tinh Ky Co., Ltd. in general.
After that, the congratulation ceremony was taken place with the attendance of Mr. Le Van Doan – Chairman of Tinh Ky Co., Ltd together with representatives from Vinpearl investor. The team of engineers of Tinh Ky Co., Ltd has worked with wisdom – quality and speed to bring good results for the works that Tinh Ky built “Nghĩ tinh thông – Làm tinh gọn”.
In order to promote and enhance the cooperation between the two companies, Mr. SAIMA YUKI – Representative of RYOKI had a meeting at Tinh Ky office.
For Tinh Ky, RYOKI is a prestigious company and one of the key potential partners of Tinh Ky in the field of M&E. The cooperation between Tinh Ky and RYOKI is based on the exchange of experience and projects on M & E including ventilation, air conditioning systems…
The Board of Directors welcomes Representative of RYOKI
At the meeting, the two parties introduced their companies, analyzed the potential cooperation points in the future, the remaining points and together discussed measures to solve the existing problems to raise the relation between the two parties to a new height. Tinh Ky thanked RYOKI for cooperation and choosing Tinh Ky to be partner and pledged to continue cooperating with RYOKI in the future.
The meeting took place in the spirit of open exchange and high agreement on the contents of cooperation and development. Hope that in new year of 2017, we shall reap a lot of success from this close cooperation.